참고자료 List (MCIK 2003) - Ref 번호 및 Title 을 적어셔서 MCIK 고객센타에 요청 하시면 관련 자료를 받아 보실수 있습니다

관리자

MCIK Application Support Desk

MCIK 2003 참고 문헌 List (Ref 번호 및 Title 을 적어셔서 MCIK 고객센타에 요청 하시면 관련 자료를 받아 보실수 있습니다).

Ref Title Author
MCIK-Polym-001 Measurement of elongation viscosity of polymer melts under processing condition H. Braun
MCIK-Polym-002 The impact of PE based Adhesive Resins and Other Thermoplastic Matrix on Mechanical Properties of Ground Rubber Tires-Thermoplastics Composites S. Kim
MCIK-Polym-003 Viscosity Measurement of Novel Polymers and Additives using a Conical Twin-screw Compounder S. Kim
MCIK-Ct-001 Rheological investigation of printing inks
MCIK-Ct-002 Characterization of the curing behaviour of an epoxy prepreg by DOM
MCIK-Ct-003 Rheological quality assurance of printing inks
MCIK-Ct-004 Selecting optium lithographic inks via rheological methods
MCIK-Ct-005 Rheological characterization of plastisol inks
MCIK-Ct-006 Comparison of commercial viscosity modifiers
MCIK-Ct-007 PMMA (Acrylic)
MCIK-Ct-008 Ink Rheology
MCIK-CS-001 Viscosity Controlling Factors of Proanthocyanidin Polymers from Pinus radiata S. Kim
MCIK-CS-002 Effect of Lyophilization of the Physical Characteristics of Medium Molecular Weight Hyaluronates S. Kim
MCIK-CS-003 Rheological Characteristics of Extracts from Pinus radiata Bark - I. Rheological Behaviour of Water Soluble Extractive Fractions and Phlobaphenes S. Kim
MCIK-CS-004 Rheological Characteristics of Extracts from Pinus radiata Bark - II. Viscoelastic Properties of Sequential Alkaline Extracts Based on Phenolic Acid Fraction S. Kim
MCIK-CS-005 Influence of Viscosity Modifying Agents on Pinus radiata Extract S. Kim
MCIK-CS-006 Effect of Urea on Molecular and Colloidal Aggregation of Proanthocyanidin Polymers from Pinus radiata S. Kim
MCIK-CS-006 Effect of Ion-binding on the Formation of Temporary Viscoelastic Networks of Proanthocyanidin Biopolymers S. Kim
MCIK-CS-007 Effect of Cation Interactions on Rheology aand Sol-Gel Transition of Chitosan Solutions S. Kim
MCIK-CS-008 Synergistic Effects and Mechanism of Coal/polypropylene Coliquefaction S. Kim
MCIK-CS-009 Flow and stability of nonaqueous dispersions S. Kim


Electronics

Ref Title Author
Elec-001 The importance of paste rheology in improving fine line, thick film screen printing of front side metallization
Elec-002 Rheology of lithograpic inks
Elec-003 RHEOLOGY AND MICROSTRUCTURE OF CONCENTRATED ZIRCONIA-ALUMINA SUSPENSIONS FOR GELCASTING COMPOSITES
Elec-004 THE EFFECT OF POLYMERS ON CERAMIC SUSPENSION RHEOLOGY AND GREEN COMPONENT PROPERTIES
Elec-005 Rheology of pastes used in MLCC & PDP industry
Elec-006 Rheology of pastes used in coating electrodes in rechargable batteries


Rheo Optics

Ref Title Author
RO-1 Monitoring of flow properties of a concentrated titanium dioxide suspension and microscopic observation of shear induced structures Fredric Bar
RO-2 RheoScope and polarized light microscopy Pierr Reinheimer
RheoScope 1; The correlation between flow and structure Pierr Reinheimer
RO-3 New experimental possibilities for the investigation of the melting of polymer blends Pierr Reinheimer
RO-4 The RheoSizer Software; The ultimate tool for microstructure and rheology analysis J.M. Madiedo
Haake RheoScope - See the point in Rheology


Extensional Rheology

Ref Title Author
CaBER-1 Measurement of extensional viscosity by stretching large liquid bridges in microgravity
CaBER-2 Breakup of an Oldroyd Liquid Bridge as a Method for Testing the Rheological Properties of Polymer Solutions
CaBER-3 CABER testing of candy Spiegelberg
CaBER-4 The Capillary Breakup Extensional Rheometer (CABER™)
CaBER-5 Effect of Fluid Relaxation Time of Dilute Polymer Solutions on Jet Break up due to a Forced Disturbance Yenny Christanti, Lynn M. Walker
CaBER-6 Drop deformation in two -dimensional elongational flow
CaBER-7 Effect of a spectrum of relaxation times on the capillary thinning of a filament of elastic liquid
CaBER-8 Extensional Rheometry of Polymer Solutions and the Uniaxial Elongation of Viscoelastic Filaments
CaBER-9 Extensional rheometry of polymeric fluids and the uniaxial elongation of viscoelastic filaments
CaBER-10 FILAMENT STRETCHING RHEOMETRY AND THE EXTENSIONAL VISCOSITY OF DILUTE AND CONCENTRATED POLYMER SOLUTIONS
CaBER-11 Extensional deformation, cohesive failure, and boundary conditions during sharkskin melt fracture
CaBER-12 Thin filament dynamics during drop pinch-off in polyelectrolyte polymer solutions
CaBER-13 Elasto-capillary thinning and breakup of model elastic liquids Shelley L. Anna, Gareth H .McKinley
CaBER-14 How to Extract the Newtonian Viscosity from Capillary Breakup Measurements In a Filament Rheometer Gareth H. McKinley, Anubhav Tripathi
CaBER-15 Influence of Viscoelasticity on the Atomization of Polymer Solutions Yenny Christanti
CaBER-16 Capillary thinning of polymeric filaments Mette Irene Kolte, Peter Szabo
CaBER-17 Local and Global Measures of the Stress Distribution in Abrupt Contraction-Expansions Jonathan P. Rothstein, Gareth H. McKinley
CaBER-18 LIQUID STRETCHING USING A FALLING CYLINDER JOSEPH E. MATTA, RAYMOND P. TYTUS
CaBER-19 A Technique for Characterizing Complex Polymer Solutions in Extensional Flows Gavin Braithwaite, Stephen Spiegelberg
CaBER-20 Shear and Extensional Investigations in Solutions of Grafted/Ungrafted Amylopectin and Polyacrylamide
CaBER-21 Shear and Extensional Rheological Investigations in Solutions of Grafted and Ungrafted Polysaccharides
CaBER-22 Investigation of the elongational behavior of polymer solutions by means of an elongational rheometer
CaBER-23 The Basics of Filament Stretching Rheometry
CaBER-24 TRANSIENT SHEAR AND EXTENSIONAL RHEOLOGY OF DILUTE AND SEMI-DILUTE POLYMER SOLUTIONS David Scott Shackleford, B. S.
CaBER-25 STUDYING THE EXTENSIONAL FLOW AND BREAKUP OF COMPLEX FLUIDS USING FILAMENT RHEOMETERS
CaBER-26 Using filament stretching rheometry to predict strang formation and "processability" in adhesives and other non-Newtonian fluids


Cosmetic

Ref Title Author
V15E Rheological Characteristics of Shaving Cream Haake Rheology Team
V91-039E Measuring and Interpreting the Rheological Properties of Cosmetic Products Holland
V95-102E Properties of a drag reduction micelle system Myska, Stern
V95-126E Colloids and Surfaces Bradna, Stern
V97-137E Yield Point Determination of Cosmetic Products with Controlled Stress Rheometers Petri
V97-148E Relations between Rheological and Sensory Characteristics of Cosmetic Emulsions Stern et al.
V137E Yield Point Determination of Cosmetic Products with Controlled Stress Rheometer Petri
V148E Relations between Rheological and Sensory Characteristics of Cosmetic Emulsions Stern


Pharma

Ref Title Author
V043E The Rheological Characterization of Thixotropic Pharmaceutical Products Holland
V050E Rheological Measurements of Pharmaceutical Products - Moisturizing Milks Holland.
V142E Rheological Characterization of Tooth Paste Kutschmann, Petri
V151E Investigation of Cremes and Gel Products with the VT550 Kutschmann
V154E Rheological Analysis of the Stability of Pharmaceutical Suspensions Kutschmann
BSR2000-11 CORRELATION BETWEEN RHEOLOGY AND FLOW BIREFRINGENCE OF A VISCOELASTIC SOLUTION OF SURFACTANT A. PONTON, J.P. DECRUPPE
BSR2000-23 RHEOLOGICAL BEHAVIOUR OF DENTRIFICIES FORMULATIONS
BSR2000-26 THIXOTROPICAL BEHAVIOUR OF GELLING AGENTS (CARBOPOL GELS) FOR THERAPEUTICAL APPLICATIONS
ma283 Rheological behaviour of alkyl polyglucoside solutions
V97-133E Applied Rheology in the Field of Dental Applications Eidam


Food

Ref Title Author
V016E Contribution to the Assessment of some Rheological Properties of Wheat Gluten Thermo Haake Rheology Team
V033E Dynamic Measurements of Jello Holland
V035E A Method for Monitoring Coagulation Holland
V042E Mozzarella Cheese,Elasticty,And Eating Pizza Holland
V045E Cappuccino In The Lab? Don’t Disturb The Foarm ! Thermo Haake Rheology Team
V051E Measuring the Effect of Gels upon Mouth-Feel Holland
V077E The Viscoelastic Properties of Chewing Gum Holland
V107E Modified HP-Starches: Advantages in Manufacturing and Texture of Processed Food Food
V108E Wheat Fiber-A Natural Functional Ingredient Food
V127E Determining the yield point of food products Petri
V132E Monitoring flow properties of food gels Eidam
V136E Viscosity Measurements on Liquid Chocolate with the VT550 Kutschmann
V138E Measurement of Butter - Complications and Possibilities Christ
V141E Applied Rheology in Food Technology Eidam, Liehr
V172E Texturizing Mayonnaise With Custom-Made Pectin Product Thermo Haake Rheology Team
V187E Rheological behavior of hydrogels in depedence on concentration of the polymer and type of neutralizing agent Petri, S. Popovic, M. Zirkovic
BSR2000-01 EFFECT OF PLANT ENZYMES ON THE RHEOLOGY OF CASEIN SOLUTIONS. SOLORZA-FERIA, J.
BSR2000-04 RHEOLOGICAL CHARACTERIZATION OF HONEY AND PROPOLIS MIXTURES CLEBER COUTO DA COSTA
BSR2000-06 RHEOLOGICAL CHARACTERIZATION OF PROTEIN-POLYSACCHARIDE INTERACTIONS IN THE CONTINUOUS PHASE OF LIGHT SALAD DRESSINGS G. VÉLEZ
BSR2000-12 LINEAR AND NON-LINEAR VISCOELASTICITY PROPERTIES OF VEGETABLE PROTEIN-STABILIZED EMULSIONS C. GALLEGOS
BSR2000-15 INTERACTIONS BETWEEN POLYSACCHARIDES AND SURFACTANTS AND THE INFLUENCE ON THE RHEOLOGICAL PROPERTIES MARIJA OBLONŠEK,
BSR2000-17 RHEOLOGICAL BEHAVIOUR OF SURFACTANT/WELAN/WATER SYSTEMS S. MANCA
BSR2000-21 VISCOELASTIC BEHAVIOR OF WAXY MAIZE STARCH - GELLAN BLENDS UNDER SMALL AMPLITUDE OSCILLATORY SHEAR RODRÍGUEZ-HERNÁNDEZ
JOR36-3-1 Linear viscoelastic behavior of commercial and model mayonnaise Crispulo Gallegos
JOR39-6-1 Shear-thickening and flow-induced structure in a system of DMSO containing waxy maize starch F. R. Dintzis
JOR39-6-2 Effects of thermomechanical processing on viscosity behavior of corn starches F. R. Dintzls
V98E Pump Maker Analyzes Flow Properties Food Egineering
ma303 Modelisation of the evolution with shear of the droplet size distribution of oil-in-water emulsions J.M. Madiedo and C. Gallegos
ma307 On the modelling of the linear relaxation spectrum of oil-inwater;emulsions J.M. Madiedo and C. Gallegos
ma315 Viscosity of sucrose palmitate aqueous systems
ma329 Influence of temperature and polymer concentration on rheological properties of gellan gum in water solutions Zupancic, Zumer
ma343 Rheo-mechanical properties of polysaccharide mixtures in;water undergoing shear U. Florjancic
ma375 Thermal induced sol-gel transition of egg yolk products
ma409 Milk puddings without milk M.C. Nunes
ma429 Effect of the addition of dried egg on the rheological and textural properties of a butter formulation R. Baixauli
ma433 Influence of type, concentration and flow behaviour of hydrocolloid solutions on aroma perception
ma441 Rheological properties of dextrins added to a butter formulation to enhance textural properties R. Baixauli
ma453 Physical characterisation of commercial jams and marmalades D. Lopes
ma465 Effect of temperature on time dependent behaviour of semisolid dairy desserts
ma473 Rheological properties of egg yolk dispersions as a function of pH and ionic strength
ma477 Influence of the addition of gellan gum on the rheology of low-calorie mayonnaise stabilised with modified starch
ma481 Influence of the type of egg yolk on the rheological properties of the continuous phase of salad dressings
ma485 Effect of the homogenisation speed on the rheological properties of low-oil content emulsions
ma493 Influence of starch concentration on low-in-fat oil-in-water emulsions, stabilised by emulsifier blends M.A. Riscardo
ma501 Flow behaviour of starch based food emulsion
V129E Experimental Influences on the Casson-Viscosty resp.Casson Yield Point at Chocolate Tests Petri
BSR2000-18 INFLUENCE OF pH AND COMPOSITION ON THE THERMAL GELATION OF EGG PRODUCTS J. MIRANDA
V50E Rheological Measurements of Pharmaceutical Products - Moisturizing Milks Holland.


Paint

Ref Title Author
V019E Textile Printing Inks Thermo Haake Rheology Team
V020E The Results of a Water Based Paint Thermo Haake Rheology Team
V025E Flow Properties of Paint Pigment Suspensions Holland
V031E Judging Paint Flow Characteristics Relative to Application Holland
V032E Predicting the Shelf-Life of Particculate Solutions Holland
V044E Predicting the Flow Behavior of Spray Coating after Application Holland
V071E The Low Shear Flow Behavior of Latex Paint Holland
V078E Measuring the Stability of Paint Tinter Holland
V116E Comparison of Rheological Behavior of Suspensions Y.Otsubo
V126E Colloids and Surfaces Bradna, Stern
V134E Using paints - Application and Rheology Eidam
V147E Rheological Characterization of Paints for the Practician Marquardt, Petri
V157E Rheological Analysis of Powder Coatings Kutschmann
V163E UV Curing Characterization Using Rheology: Coatings Cesar Gonzalez
BSR2000-03 RHEOLOGICAL INVESTIGATION OF SILICON AND TITANIUM OXIDE BASED GELS A. PONTON
BSR2000-05 THE VISCOELASTIC PROPERTIES OF INDUSTRIAL REACTIVE PRINTING DYES URŠKA FLORJANCIC
BSR2000-09 TIME DEPENDENT PROPERTIES OF CONCENTRATED FRIT SUSPENSIONS FERNANDA ANDREOLA
BSR2000-10 THERMORHEOLOGICAL PROPERTIES OF MAGNETIC DISPERSIONS BYEONG S. CHAE
BSR2000-13 THE EFFECT OF SHEAR ON THE STRUCTURAL EVOLUTION OF SILICA SOLS AND GELS E. DRABAREK
BSR2000-14 RHEOLOGY OF CONCENTRATED AQUEOUS PTFE NANODISPERSIONS ENRICO MARCHESE
BSR2000-20 NONLINEAR VISCOELASTICITY AND SHEAR THICKENING OF SUSPENSIONS FLOCCULATED BY REVERSIBLE BRIDGING YASUFUMI OTSUBO
BSR2000-25 TRANSIENT BEHAVIOR OF CONCENTRATED SUSPENSIONS AFTER A STEPWISE CHANGE IN SHEAR DIRECTION T.NARUMI
BSR2000-28 THIXOTROPIC BEHAVIOUR OF LAPONITE SUSPENSIONS AS STUDIED BY RHEO-OPTICAL TECHNIQUES STÉPHANE COCARD
JOR41-3-1 Viscosity equation for concentrated suspensions of charged colloidal particles A. Ogawa
JOR41-6-1 Testing the structure of magnetic paints with and without superimposed shear Andrei A. Potanin
V96-134E Using Paints - Application and Rheology Eidam
Lr34-e Determination of the Reactivity of Coating Powders with the HAAKE Comixer and the Software PolyView
ma229 Zeta potential and rheological behaviour of aqueous kaolin suspensions dispersed with Sodium Hexametaphosphate F. Andreola
ma245 Preshear effect on the viscoelasticity of coating color and the;impact of the inhibitor on the structure of coating formulation Haifa el-sadi
ma251 Rheology of pigment concentrates R. Lapasin


Polymer

Ref Title Author
V040E Elastictiy and Effect Upon Mold-Filling Holland
V041E Tracking the Curing of Epoxy with a Rotational Viscometer Holland
V058E Estimating the Yield Stress from a Stress Ramp Holland
V059E The Measurement of Cure with Forced-Oscillation Holland
V082E Measuring Fast Curing Melts Marquardt
V086E Importance of Temperature Control During Curing Reactions Holland
V087E Measurement of the Viscoelastic Properties of Polymer Melts Holland
V089E Rheological Charcterization of a Polystyrene Melt Marquardt
V091E Characterization of a Polyethlene Melt Braun, Marquardt
V102E Properties of a drag reduction micelle system Myska, Stern
V103E Molecular Weight Distribution Obtained From Rheological Experiments Using A New Analytical Inversion Schema Braun, Friedrich, Fuchs
V104E Molecular Weight Distribution Obtained From Rheology, Different Methods And Common Problems Braun, Friedrich, Meier
V125E Polymer Package for Thermo Haake Rheometers Marquardt
V128E Measurement of the viscoelastic properties of resins Christ
V131E Determination of molecular weight distribution from rheological experiments Kutschmann
V139E Rheologiscal Characterization of Polymers Christ
V150E Rheological Methods for Determining Molecular Weight and Molecular Weight Distribution Braun, Eckstein, Fuchs, Friedrich
V160E Quality Control based on Rheological Molecular Weight Distribution Fingerprints Braun
V169E Rheological Investigation of three rubbers with different shore factors with respect to their shape stability before curing Eidam, Liehr
V191E Rheological tests on thermoplastic elastomers Kutschmann
BSR2000-16 TRANSIENT FLOW BIREFRINGENCE OF A VISCOELASTIC SOLUTION IN SHEAR BANDING FLOW JEAN-PAUL DECRUPPE
BSR2000-24 RHEO-OPTICAL BEHAVIOUR OF ASSOCIATING POLYMERS UNDER SHEAR FLOW JEAN-FRANÇOIS LE MEINS
V93-062E Characterizing Flow Regimes - Testing Sprayable PVC Plastisols Holland
V95-101E Relaxation Time Spectra in Rheology: Calculation Examples Weese, Friedrich
PPS509 BLENDS OF HIGH DENSITY POLYETHYLENE AND POLY (ETHYLENE TEREPHTHALATE )
PPS496 Influence of PP-g-MAH Compatibilizer Characteristics on Interphase and Mechanical Properties of Glass Fiber Reinforced Polypropylene Composites
PPS423 Selected Mechanical and Thermal Properties of PA/PP blends
PPS413 Slip at Polymer-Polymer interfaces
PPS410 Rheology, Structure and Properties of Silicate/Polyamide Nanocomposites
PPS372 Relationships between steady-shear and dynamic state behaviour in PA-PE blends
PPS362 Thermal Properties of Nylon 6/ABS Polymer Blends
PPS355 Preparation, characterization and foaming process of biodegradable nanocomposites
PPS336 Rheological behavior of multiwalled carbon nanotube/polycarbonate composites
PPS311 Extrusion of zeolitic honeycomb structures using thermoplastic polymers as plasticising aid and binder
PPS302 REAL-TIME MEASUREMENTS AND MODELING OF MICROSTRUCTURE IN BLOWN FILM EXTRUSION OF A LINEAR LOW-DENSITY POLYETHYLENE
PPS279 A chemical model for the dispersion of fillers in a polymeric matrix
PPS277 Melt Blending of Polystyrene/Organoclay Nanocomposites
PPS276 Reactive doping of PAni-CSA and its use in conducting coatings
PPS243 Crystallization Behavior and Relaxation Processes in Basalt Fibers Reinforced Polypropylene
PPS225 Phase Inversion and Cocontinuity in Immiscible Polymer Blends
PPS222 Effect of Processing History on the Sintering of Ethylene Copolymers
PPS217 Mixing and Diffusion of Plasticizer in Elastomers
PPS185 Morphological Evolution During Processing of Compatibilized and Uncompatibilized PBT/ABS Blends
PPS164 Effect of the Particle Character of PVC on Its Fusion Behavior
PPS154 Rheological Study of the influence of Branch Content on the Miscibility of octene m-LLDPE/LDPE and ZN-LLDPE/LDPE Blends
PPS136 Correlation between rheological properties and morphology of blends of polystyrene with devulcanized SBR
PPS135 Morphology and Thermal Properties of Blends of PET and a LCP after Capillary Flow
PPS129 Effects of Composition, Processing Conditions and Reactive Compatibilization on the Mechanical Properties of PA6/AES Blends
PPS123 Relating Rheological Properties to Structure for Reactively Compatibilised PP/PBT Blends
PPS101 Correlation between the Evolution of EVA/PP TPV Morphology and the Crosslinking Reaction
PPS100 Polymer-Clay Nanocomposites Prepared by Power Ultrasonic Wave; Synthesis and Rheological Properties
PPS060 Evolution of phase morphology of PA6/AES blends during processing at the melt state
PPS046 Reactive Processing x Compatibilizer: A New Morphology is found for a Conducting Thermoplastic
PPS023 Polymer Nanocomposite Foams by Using Supercritical CO
PPS011 The effect of water, temperature and mechanical energy on maize starch structure
Lr46-e Conductivity Measurement for Rubber Compound Qulification
Lr45-e Determinig Formulation and Predicting Processability of PIM Feedstock
Lr44-e Test methods for characterization and optimization of recycling polymers
Lr40-e Kinetic quality control rubber carbon blacks
Lr38-e Production of a blend of two different concentrations by a parallel double screw extruder and a further processing through a melt pump and following measurement of the rheological characteristics in slot and rod capillary dies
Lr36-e In-Process Measurement at-Line testing of 3 HDPE for determining film quality and simultaneous on-Line MFR/MVR monitoring
Lr35-e Charecterization of PVC-Compounds
Lr33-e Viscosity measurement of LDPE samples with the same MFI value
Lr29-e How to Relate Test Results of a Torque Rheometer to Problems in Elastomer Processing
Lr28-e Compounding - Processing - Rheological Testing: All in one Test Run
Lr27-e Innovative Solutions for Polymer Processing and Characterization
Lr26-e Testing the Behavior of Thermosetting Compounds with Respect to Flow and Rate of Cure Making Use of a Torque Rheometer
Lr24-e Influence of the incorporation sequence of different components of the same recipe on the energy consumption of the mixing process
Lr23-e Application of the temperature program for the investigation of the gelling behavior of plastisols
Lr22-e Application of the speed program for the differentiation of two natural rubber samples
Lr21-e Testing the Flow Behavior of two Batches of a Ceramic Injection Moulding Compound
Lr20-e Testing the Flow Properties of Acrylnitril-Butadien-Styrol-Terpolymer (ABS)
Lr19-e Differentiating PP Samples from Different Suppliers with the Same MFI Value
Lr18-e Examining the Influence of Stabilizers on the Flow Characterisctics of Polyamide
Lr17-e Examining the Plastiying and Degradation Behavior of PVC
Lr16-e Extruding Polymers: Viscosity and Die Swell Depending on the Extrusion / Shear Rate
Lr15-e Testing the Flow Characteristics of Glass Fiber Reinforced TPU
Lr14-e Pigment Differentiation in Masterbatches
Lr13-e Characterizing Masterbatches Using the Screen Life Test Method
Lr12-e The Curing Behavior of Reaction Resin Compounds
Lr11-e Flow and Cross-Linking Behavior of Cross-Linking Polyethylenes (XLPE)
Lr10-e Differentiating PVC Dry Blend Batches with an Extruder Sensor
Lr9-e Investigation of PVC Dry Blends with Different Stabilizers
Lr8-e Differentiating Rubber Compounds with the same Mooney Viscosity
Lr6-e Investigation of the Flow Characteristics of PEPT at Different Temperatures
Lr5-e Investigation of the Influence of Two Types of Carbon Black on the Flow Behavior of SAN
ma011 Phase inversion and melt elasticity of polymer blends F.Prochazka
ma099 Rheological properties of PE/EPDM modified binders
ma107 Flow behaviour of recycled polyethylene modified bitumens
ma225 Critical changes in the rheological properties of PTFE dispersions R. Lapasin


Oil

Ref Title Author
V083E Viscosity Standard Fluids Marquardt
V117E Rheology of Lubricating Greases; 1995 ELGI Annual Meeting Steinbrüggen
V194E Greases: rheological measurements in rotational mode Thermo Haake
BSR2000-07 DETERMINATION OF THE THIXOTROPIC CONSTITUTIVE EQUATION FOR A WAXY CRUDE OIL D C-H CHENG
BSR2000-08 BREAKUP IN CONCENTRATED OIL-IN-WATER EMULSIONS K.M.B. JANSEN
BSR2000-27 THE INFLUENCE OF WATER QUALITY ON PROPERTIES OF DRAG REDUCING SURFACTANTS J. MYSKA
JOR35-6-1 The measurement and description of the yielding behavior of waxy crude oil L. T. Wardhaugh
ma095 Polyethylene modified bitumen
ma103 Thermal susceptibility of ground tire rubber-modified bitumens F. J. Navarro


Powder Coating

Ref Title Author
V157E Rheological Analysis of Powder Coatings Kutschmann
MCIK-Ct-009 Rheological behaviour during phase separation induced by UV curing
V99-163E UV Curing characterization using rheology; Coatings
MCIK-Ct-010 Rheological Characterization of UV Curing Gels


Adhesives

Ref Title Author
V018E Rheology of Cigarette Glue Thermo Haake Rheology Team
V026E Normal Stress Measurement of Engineering Adhesives Marquardt
V057E Simulating the Slumping of Spray Sealants Holland
V062E Characterizing Flow Regimes - Testing Sprayable PVC Plastisols Holland
V076E Rheological Test of PVC Samples with Ferrite Filler Marquardt
V133E Applied Rheology in the Field of Dental Applications Eidam
V161E Prediction of flow behavior in adhesive and sealant applications using different rheological measuring techniques Liehr
V153E Characterization of Pressure Sensitive Adhesives (PSA-Systems) Eidam
V036E The Processing of Hot Melt Glue Holland


Construction

Ref Title Author
V014E Rheological Models for Gypsum Plaster Pastes Thermo Haake Rheology Team
V164E Characterization of Ceramics using Rheology Cesar Gonzalez
V190E Strategic Highway Research Program (SHRP) and the Measurement of Bitumen with the Thermo Haake Rheometers RW1 and RV1 Dr. Christ
BSR2000-02 INFLUENCE OF BLAST FURNACE SLAG ON THE RHEOLOGICAL PROPERTIES OF CEMENT PASTES STEFANIA GRZESZCZYK
JOR40-4-1 Rheological characterization of Hanford neutralized current acid waste simulant slurries C. Chang

Flow and Microstructure of Dense Suspensions

PART I: FUNDAMENTAL ASPECTS OF SUSPENSIONS

3 CRYSTALLIZATION IN SUSPENSIONS OF "HARD" COLLOIDAL SPHERES
7 VISCOELASTIC PROPERTIES OF CONFINED POLYMER LAYERS
CHARACTERIZATION OF MONODISPERSE AQUEOUS LATEX DISPERSIONS PREPARED WITH N-ISOPROPYLACRYLAMIDE
13 INTERPARTICLE FORCES AND THE RHEOLOGY OF COLLOIDAL DISPERSIONS
25 INTERACTION BETWEEN COLLOIDAL PARTICLES IN A.C. ELECTRIC FIELDS IN THE RELAXATION REGION OF DOUBLE LAYERS


PART II: THEORETICAL ASPECTS OF FLOW AND MICROSTRUCTURE

33 THE SIMULATION OF AGGREGATED COLLOIDS UNDER FLOW
43 NMR STUDIES OF SOLVENT DYNAMICS IN HIGH SOLIDS ALUMINA SLURRIES
49 COARSENING OF A QUIESCENT ELECTRORHEOLOGICAL FLUID I: EXPERIMENT
57 COARSENING OF A QUIESCENT ELECTRORHEOLOGICAL FLUID II: THEORY
63 ORIENTATIONAL ORDERING OF RIGID ROD POLYMERS IN SHEAR FLOW
69 STRUCTURAL NETWORK MODEL OF DENSE SUSPENSION
75 SHEAR-INDUCED STRUCTURAL CHANGES OBSERVD IN CONCENTRATED SUSPENSIONS OF BINARY BLENDS OF FLUORESCENT PARTICLES OF DIFFERING SIZE AND COLOR
81 SHEAR THINNING PROPERTIES OF DENSE SUSPENSIONS: RHEOLOGY AND FLOW DICHROISM
87 RHEOLOGICAL PROPERTIES OF DENSE SILICA SUSPENSIONS
95 NUCLEAR MAGNETIC RESONANCE IMAGING (NMRI) OF FLOW-INDUCED MICROSTRUCTURE OF CONCENTRATED SUSPENSIONS


PART III: CERAMIC MATERIALS

103 FACTORS AFFECTING THE EXTENSIONAL FLOW OF CROWDED SUSPENSIONS FOR THE MANUFACTURE OF THIN WALL CERAMIC BODIES
109 RHEOLOGY AND MICROSTRUCTURE OF CONCENTRATED ZIRCONIA-ALUMINA SUSPENSIONS FOR GELCASTING COMPOSITES
117 THE EFFECT OF POLYMERS ON CERAMIC SUSPENSION RHEOLOGY AND GREEN COMPONENT PROPERTIES
123 CHARACTERIZATION OF CERAMIC BATCH VIA CAPILLARY RHEOMETRY
129 THE ROLE OF RHEOLOGICAL CHARACTERIZATION OF CERAMIC DOPES IN PREDICTING FIBER SPINNING PERFORMANCE
135 EXTRUSION RHEOLOGY AND STRUCTURE OF ALUMINA-SILICON CARBIDE COMPOSITES
141 RHEOLOGY OF YBa2Cu3 O7-x PRECURSORS


PART IV: CEMENT-BASED MATERIALS

149 STRUCTURE AND RHEOLOGY OF CEMENT-BASED SYSTEMS
161 MICROSTRUCTURE AND FLOW BEHAVIOR OF FRESH CEMENT PASTE
167 THEORETICAL AND EMPIRICAL MODELING OF THE RHEOLOGY OF FRESH CEMENT PASTES
173 CEMENT VISCOSITY AS A FUNCTION OF CONCENTRATION
179 LOW STRAIN SHEAR BEHAVIOUR OF CEMENT SLURRIES AT QUASI-STATIC RATES
185 ON THE DEVELOPMENT OF RHEOLOGICAL PROPERTIES OF CEMENT PASTE DURING THE INDUCTION PERIOD
191 EFFECT OF SUPERPLASTICIZERS ON THE WORKABILITY OF CONCRETE AS EVIDENT FROM APPARENT VISCOSITY, YIELD STRESS AND ZETA-POTENTIAL
199 THE INTERACTION OF POLYMER DISPERSIONS WITH PORTLAND CEMENT PASTE


PART V: FLOW BEHAVIOR OF OTHER INDUSTRIALLY IMPORTANT MATERIALS

207 THE FLOW BEHAVIOUR OF CONCENTRATED CLAY SUSPENSIONS UNDER HIGH PRESSURES
213 CONSTITUTIVE BEHAVIOR OF SEMI-SOLID METAL ALLOY SLURRIES
221 RHEOLOGY CONTROL IN HIGH SOLIDS SOLVENT BORNE COATINGS CONTAINING POLYMER MICROGELS
227 SURFACE-ENHANCED RAMAN SPECTROSCOPY FROM COLLOIDS AT HIGH PRESSURES
231 FLOW RESPONSE AND MICROSTRUCTURE OF POLYMERS


PART VI: CHARACTERIZATION OF FLOW BEHAVIOR

239 GRANULAR FLUIDS RHEOMETRY
245 A TWO ROLL MILL AS A RHEOMETER FOR PASTES
251 EQUILIBRIUM-STATE DENSITY PROFILES OF CENTRIFUGED CAKES OF FLOCCULATED SUSPENSIONS


Electro-Rheology (ER)

Ref Title Author
V099E Creep behavior of electrorheological fluids Otsubo, Edamura
V109E The Influence of Cylinder Geometry in the Measurement of ER Fluids with Cylindrical Rotational Viscometers Janocha, Bölter Rech
V114E ER-Suspensions And Homogeneous ER Fluids Janocha, Bölter
JOR38-6-2 Creep behavior of electrorheological fluids Yasufumi Otsubo, Kazuya Edamura
JOR41-2-1 Electrorheological effect in immiscible polymer blends Kozo Tajiri
ER-Paper A New Rheometer for the Characterization of ER Fluids Holland, Mq


Rheological Methods

Ref Title Author
V001E Predicting the Influence of Temperature upon Viscous Properties Holland
V002E Oscillating vane sensor measurements
V004E Introduction to Normal Stress Nijman
V007E Interpretation of Regression Analysis Data Marquardt
V010E Introduction to Elasticity Haag
V012E Normal Stress Measurements Thermo Haake Rheology Team
V013E The Yield Stress An Engineering Reality Thermo Haake Rheology Team
V021E A Method for Judging whether Slip Flow is Prevalent Thermo Haake Rheology Team
V027E Steady Shear Rheological Equations for a Parallel Plate Geometry Marquardt
V028E Viscosity Measurement in Accordance with ASTM D4287-88 with the Thermo Haake Viscotester VT500/VT501 Schreyer
V034E Observing the Complete Viscoelastic Picture Marquardt
V038E Consideration of Viscous Heating Holland
V047E A General Introduction to the Theory of Forced Oscillation Holland
V052E A General Introduction to the Theory of Creep Testing Holland
V053E An Analytic Overview of Creep Testing Holland
V061E Experimental Errors Using Rotational Rheometers Marquardt
V063E Determination of the Zero Viscosity Using RheoStress RS100 Marquardt
V073E What Is the Relationship Between Creep and Compliance Curves? Holland
V075E Determination of the Calculation Factors for Viscometers Marquardt
V079E Time-Temperature-Superposition Marquardt
V084E Determination of the Yield Point - VT550 Marquardt
V093E Correction of the Air Bearing Friction Marquardt
V098E Pump Maker Analyzes Flow Properties Food Egineering
V100E Which Is More Critical-The Stress Or The Strain? Holland
V101E Relaxation Time Spectra in Rheology: Calculation Examples Friedrich
V129E Experimental Influences on the Casson-Viscosty resp.Casson Yield Point at Chocolate Tests Petri
V140E Measuring uncertainties at the VT550 Kutschmann
V143E Getting best results from modern rotational rheometers; some inside information. Marquardt
V156E Yield Point Determination - a Critical Discussion of Different Methods Kutschmann
V166E How to select the most adequate sensor for your application Cesar Gonzalez
V167E Understanding the Temperature-Time-Relationship for Thermosetting Systems Cesar Gonzalez
V173E YIELD POINT MEASUREMENTS WITH MODERN CS RHEOMETER Liehr
JOR38-6-1 Letter to the Editor: Which Is More Critical -The Stress Or The Strain? David Holland
V056E Rheology for predicting process performance Holland
V072E The Effect of Temperature upon Creep Curves Holland


Polymer Characterization and Processing Instruments Reports
Thermo Haake has a wide range of application reports covering polymer technology-related application issues.

Ref Title
LR20e Testing the Flow Properties of Acrylnitril-Butadien-Styrol-Terpolymer (ABS)
LR21e Testing the Flow Behavior of two Batches of a Ceramic Injection Moulding Compound
LR22e Application of the speed program for the differentiation of two natural rubber samples
LR23e Application of the temperature program for the investigation of the gelling behavior of plastisols
LR24e Influence of the incorporation sequence of different components of the same recipe on the energy consumption of the mixing process
LR26e Testing the Behavior of Thermosetting Compounds with Respect to Flow and Rate of Cure Making Use of a Torque Rheometer
LR27e Innovative Solutions for Polymer Processing and Characterization
LR28e Compounding - Processing - Rheological Testing: All in one Test Run
LR29e How to Relate Test Results of a Torque Rheometer to Problems in Elastomer Processing
LR30e The Residual Current Operated Device and PolyLab ?
LR31e OQT 512 - Applications when used with the blown-film and sheet, tape and ribbon take-off
LR32e Optimizing mixer tests with the help of the worksheet technique
LR33e Viscosity measurement of LDPE samples with the same MFI value
LR34e Determination of the Reactivity of Coating Powders with the Thermo Haake Comixer and the Software PolyView
LR35e Characterization of PVC-Compounds
LR36e In-Process Measurement at-Line testing of 3 HDPE for determining film quality and simultaneous on-Line MFR/MVR monitoring
LR37e Use of Modern PolyLab Torque Rheometer System for Material Characterization
LR38e Production of a blend of two different concentrations by a parallel double screw extruder and a further processing through a melt pump and following measurement of the rheological characteristics in slot and rod capillary dies
LR40e Kinetic Quality Control of Rubber Carbon Blacks the help of the worksheet technique
LR43e MiniLab-Compounder and Reactor
LR44e TEST METHODS FOR CHARACTERIZATION AND OPTIMIZATION OF RECYCLING POLYMERS
LR45e Determining Formulation and Predicting Processability
LR46e Conductivity Measurement for Rubber Compound Qualification
LR47e Evaluation of an intrumented lab-scale extruder for melt extrusion
PPS011 The effect of water, temperature and mechanical energy on maize starch structure
PPS023 Polymer Nanocomposite Foams by Using Supercritical CO
PPS046 Reactive Processing x Compatibilizer: A New Morphology is found for a Conducting Thermoplastic
PPS060 Evolution of phase morphology of PA6/AES blends during processing at the melt state
PPS100 Polymer-Clay Nanocomposites Prepared by Power Ultrasonic Wave; Synthesis and Rheological Properties
PPS101 Correlation between the Evolution of EVA/PP TPV Morphology and the Crosslinking Reaction
PPS123 Relating Rheological Properties to Structure for Reactively Compatibilised PP/PBT Blends
PPS129 Effects of Composition, Processing Conditions and Reactive Compatibilization on the Mechanical Properties of PA6/AES Blends
PPS135 Morphology and Thermal Properties of Blends of PET and a LCP after Capillary Flow
PPS136 Correlation between rheological properties and morphology of blends of polystyrene with devulcanized SBR
PPS154 Rheological Study of the influence of Branch Content on the Miscibility of octene m-LLDPE/LDPE and ZN-LLDPE/LDPE Blends
PPS164 Effect of the Particle Character of PVC on Its Fusion Behavior
PPS185 Morphological Evolution During Processing of Compatibilized and Uncompatibilized PBT/ABS Blends
PPS217 Mixing and Diffusion of Plasticizer in Elastomers
PPS222 Effect of Processing History on the Sintering of Ethylene Copolymers
PPS225 Phase Inversion and Cocontinuity in Immiscible Polymer Blends
PPS243 Crystallization Behavior and Relaxation Processes in Basalt Fibers Reinforced Polypropylene
PPS276 Reactive doping of PAni-CSA and its use in conducting coatings
PPS277 Melt Blending of Polystyrene/Organoclay Nanocomposites
PPS279 A chemical model for the dispersion of fillers in a polymeric matrix
PPS302 REAL-TIME MEASUREMENTS AND MODELING OF MICROSTRUCTURE IN BLOWN FILM EXTRUSION OF A LINEAR LOW-DENSITY POLYETHYLENE
PPS311 Extrusion of zeolitic honeycomb structures using thermoplastic polymers as plasticising aid and binder
PPS336 Rheological behavior of multiwalled carbon nanotube/polycarbonate composites
PPS355 Preparation, characterization and foaming process of biodegradable nanocomposites
PPS362 Thermal Properties of Nylon 6/ABS Polymer Blends
PPS372 Relationships between steady-shear and dynamic state behaviour in PA-PE blends
PPS410 Rheology, Structure and Properties of Silicate/Polyamide Nanocomposites
PPS413 Slip at Polymer-Polymer interfaces
PPS423 Selected Mechanical and Thermal Properties of PA/PP blends
PPS496 Influence of PP-g-MAH Compatibilizer Characteristics on Interphase and Mechanical Properties of Glass Fiber Reinforced Polypropylene Composites
PPS509 BLENDS OF HIGH DENSITY POLYETHYLENE AND POLY (ETHYLENE TEREPHTHALATE )


Software

Ref Title Author
V048E Making Routine Measurements Routine-Thermo Haake's Job Stream Holland
V064E Preset-Postset Function in the Thermo Haake Software Marquardt
V092E Hardware Requirements for Thermo Haake Software Marquardt
V135E Trouble Shooting Thermo Haake Rheometer Software Marquardt
V170E Installation of RheoWin Software Operation Note Liehr
V171E Setting up a measurement definition Software Operation Note Liehr
V175E Software RheoWin QC Marquardt
V188E Intelligent Software in Rheometry with Snapshot Technology Marquardt
V189E Intelligent Software in Rheometry with RheoWizard Marquardt


Instrumentation

Ref Title Author
V054E What is a Controlled-Stress Rheometer? Holland
V065E Controlled Rate with Controlled Stress Rheometers Marquardt
V068E Double Cone Sensor System Marquardt
V081E Disposable Parallel-Plate Sensors Marquardt
V085E New Measuring Geometry to Extend the Application Range Marquardt
V097E Determination of Instrument Factors Marquardt
V106E The Torque Calibration Of A Controlled-Stress Rheometer Nijman, Platzek
V110E Pressure Sensor System D35/200 for Thermo Haake Rheometers Thermo Haake
V111E SHRP and the Measurement of Bitumen Christ
V112E Adjusment and Testing Tool for Thermo Haake Rheometers Thermo Haake
V113E Peltier Temperature Control System for Thermo Haake Rheometers Thermo Haake
V145E Viscometer-Viscosity DIN Standards Marquardt
V146E ISO-Viscometer-Viscosity Standards Marquardt
V149E ASTM Viscometer-Viscosity Standards Marquardt
V168E Innovative Measuring Concepts in Quality Control and Development: „Series 1“ Viscometer + Rheometer Eidam
V176E New Features with Series 1 Rheometers and RheoWin Marquardt
V177E Series 1 Accessories:Measuring system Z10 Marquardt
V178E Series 1 Accessories:Measuring system Z40 Marquardt
V179E Series 1 Accessories:Measuring Plate MP61 Marquardt
V180E Series 1 Accessories:Measuring Plate Cover Marquardt
V181E Series 1 Accessories:Disposable Plate Holder Marquardt
V182E Series 1 Accessories:Sample protection cover Marquardt
V183E Series 1 Accessories:Solvent trap Marquardt
V184E Series 1 Accessories:Cone Heater TC1 Marquardt
JOR39-5-1 A new viscometer for rheological measurements on settling suspensions B. Klein, J. S. Laskowski, and S. J. Partridge
Lr47-e Evaluation of an instrumented lab-scale extruder for melt extrusion
Lr43-e MiniLab - Compounder and Reactor
Lr37-e Use of Modern PolyLab Torque Rheometer System for Material Characterization
Lr31-e OQT 512 - Applications when used with the blown-film and sheet, tape and ribbon take- off
Lr30-e The Residual Current Operated Device and PolyLab ?
Lr7-e Energy Calculaton in Mixers - Torque and Specific Mechanical Energy
Lr4-e Helpful Data for Tests with Extruder Sensors
Lr3-e
Lr2-e Test Parameters for Mixer Tests
Lr1-e Establishing the Test Weight for Mixer Tests
Lr32-e Optimizing mixer tests with the help of the worksheet technique
V93E Correction of the Air Bearing Friction Marquardt
V140E Measuring uncertainties at the VT550 Kutschmann
V166E How to select the most adequate sensor for your application Cesar Gonzalez