저희 MCIK에서는 국내 응용 유변학 (Applied Rheology) 의 저변 확대와 그동안 고객 여러분의 성원에 답하고저
2013 년도 제 2차 Annual Rheology Seminar 를 아래와 같이 개최하오니 관심있으신 분들의 많은 참여 부탁 드립니다;
1. 행 사 명 : 2013년도 제 2차 MCIK 정기 유변학 관련 강좌
2. 주 최: MCIK / 독일 Thermo Electron (Karlsruhe) GmbH
3. 일 시 : 2013년 12월 05일 (목요일) 9:30AM ~ 4:30PM
4. 장소: 서울 서초구 외교센터 빌딩 2층 203호 (지하철 3호선 양재역에 하차 12번 출구 예술의 전당 방면 도보 5분)
- 외교센터 ( http://diplomatic.dic.co.kr/ ) 유로 주차장 1일 20,000 원 ( 사전 신고시에 한함)
5. 참 가 비 : 무료 (점심 식사는 제공되지 않습니다)
6. 접수 마감일: 2013년 11월 29일 금요일 5:00 PM (한정된 좌석 사정으로 등록 순서대로 참가증을 교부 합니다)
7. 참가신청방법 : 참가신청서를 MCIK 에 우편, Fax 또는 E-mail로 송부
*참가신청서: 첨부 파일
8. 접수 및 문의 : MCIK 행정 지원부
Tel: 02-3143-2740 / 1979, Fax: 02-3143-2753, E-mail: admin@mcik.co.kr
담당: 황 병진 부장
9. 강연및 강사
Speaker:
Dr. Klaus Oldörp
Senior Application Specialist , Thermo Electron (Kalrsruhe) GmbH, Germany
PhD 1994 on polymer rheology, University of Hamburg, Germany
1993 – 1997 Project leader Synthetic resins, Fraunhofer Research Institute for Wood Research, Braunschweig, Germany
1998 – 2001 Occupatinal Health and Safety Expert, ICI Polyurethanes (later Huntsman Polyurethanes), Everberg, Belgium
2002 – 2003 Independent Consultant, Belgium
2003 - Senior Application Specialist, Thermo Fisher Scientific, Karlsruhe
Speaker: 김승록 박사 (MCIK 대표)
Dr Kim has obtained his Ph.D. in Applied Chemistry from the Centre for Applied Colloid & BioColloid Science (Swinburne University of Technology) in Melbourne in 1994. Following his Ph.D candidature, he accepted a position as a post-doctoral fellow for 2 1/2 years in the area of rheology and polymers. He continued his research work as a senior research fellow for both the Rheology and Material Processing Centre and the Polymer Technology Centre at the Royal Melbourne Institute of Technology (R.M.I.T). He then worked as a research fellow at Kwangwoon University in Seoul and has also worked as a lecturer at the Yeonsei and Samyook Universities in Korea. Dr. Seungrok Kim then worked as a Thermo Haake regional manager in Asia-Pacific till the beginning of 2002.
Dr. Kim established MCIK in early March of 2002. This has been sought after his determination in applying his profound Material Characterization (MC) knowledge into real cases
with regard to a wide range of rheology- and material characterization-related scientific and technological problems.
Thermo Electron 사의 Haake RheoWin Programme 및 Demo specimens 과 다양한 비디오 교재등을 이용하여 유변학적인 방법을 이용한 현탁액내 입자의
분산성 향상 및 최적 시료 Formulation 파악 및 최적 작업 조건 도출 및 효율성있는 QC 방법 (Rheological Fingerprinting) 개발등 산업체의 다양한
Applications 과 관련되어 시도되는 유변학 기초 강연 및 관련 이론의 응용을 위한 Workshop.
Rheology 기초 이론의 소개 및 다양한 재료를 사용하여 실제 시험에의 응용 과정등을 소개하고 도출된 시험 결과의 해석 및 응용 사례등을 소개하게 됩니다.
유변학 시험 결과의 정확한 해석을 위해 시도되는 Particle morphology, 접촉각, 표면장력 및 제타 포텐셜등 보족적인 다양한 종류의
시험 방법에 대한 소개 및 재료의 Easy transfer, 인쇄된 Profile 의 목표로하는 종횡비 유지 관련 시험, 원하는 Geometry 의 Profile
압출 가공 등 응용 방법 관련 질의을 받아 가면서 진행하여 다양한 Rheology 이론의 소개와 함께 이들 이론의
실제 시험에의 응용을 위한 유익한 Forum 이 될것입니다.
* 2013년 12월 05일 (목) 9:30AM ~ 4:30PM
(1-1) 09:30 ~ 10:50 강좌 1 (Dr. Klaus Oldörp)
- Part-1. : Measuring Principle of Rotational Rheological Measuring Systems.
How can we measure viscosity?
Rotational viscometer/ rheometer.
- Part-2: Basics of Steady Shear Rheology Measurements
Viscosity
Time dependence of shear viscosity – Thixotropy & Rheopexy
Viscosity measurement examples
Yield stress
10:50 ~ 11:05 Coffee Break
(1-2) 11:05 ~ 12:35 강좌 2 & Workshop (Dr. SR Kim)
- Part 3. Steady Shear Measurement Workshop:
Comparison of rheometer data against spindle viscometer test data
Vane test methods
Viscosity and volume fraction
Viscosity and shear rate in the presence of surfactant
Data evaluation and analysis elements
Flow curves and constitutive equation fitting
Regression parameters
Thixotropy tests – Thixotropic hysteresis measurements & Thixotropic Index (TI)
Time & temp. dependent measurements
Yield stress measurements
Axial measurements ( tack measurements )
12:35 ~14:00 Lunch
(1-3) 14:00~15:30 강좌 3 (Dr. Klaus Oldörp)
- Part 4 . Correlation of Rheological Curves, Microscopic Images and Optical Measuring Methods
Rheology & Microscopy
Characterization of melting behaviour of polymers
Mixing behaviour of polymer and masterbatch
Characterization of crystallization process
- Part 5. Analyzing and Quantifying Extensional Flow Properties with CaBER
Elongational testing and example data (printing and fiber spinning application etc.)
- Part 6. Viscoelasticity
Linear viscoelasticity
Creep & recovery
Dynamic oscillatory measurements (DOM)
Test and data evaluation using Lissajous plots
Time temperature superposition (TTS)
Molecular structural analysis via DOM
Time and temp. dependent oscillation measurements
Dynamic mechanical thermal analysis ( solid specimen torsional DMA testing)
Dynamic Oscillatory Measurements (DOM)
- Part 7 . Simultaneous UV and thermal assisted rheological testing (UV assisted thermal curing)
Spectroscopical insight into rheology with an on-line FT-IR module Rheonaut
(Coupling of a rheometer with FT-IR spectrometer)
Characterization of curing of polyurethane foams and adhesives in oscillatory shear with a Rheonaut etc.
저희 MCIK에서는 국내 응용 유변학 (Applied Rheology) 의 저변 확대와 그동안 고객 여러분의 성원에 답하고저
2013 년도 제 2차 Annual Rheology Seminar 를 아래와 같이 개최하오니 관심있으신 분들의 많은 참여 부탁 드립니다;
1. 행 사 명 : 2013년도 제 2차 MCIK 정기 유변학 관련 강좌
2. 주 최: MCIK / 독일 Thermo Electron (Karlsruhe) GmbH
3. 일 시 : 2013년 12월 05일 (목요일) 9:30AM ~ 4:30PM
4. 장소: 서울 서초구 외교센터 빌딩 2층 203호 (지하철 3호선 양재역에 하차 12번 출구 예술의 전당 방면 도보 5분)
- 외교센터 ( http://diplomatic.dic.co.kr/ ) 유로 주차장 1일 20,000 원 ( 사전 신고시에 한함)
5. 참 가 비 : 무료 (점심 식사는 제공되지 않습니다)
6. 접수 마감일: 2013년 11월 29일 금요일 5:00 PM (한정된 좌석 사정으로 등록 순서대로 참가증을 교부 합니다)
7. 참가신청방법 : 참가신청서를 MCIK 에 우편, Fax 또는 E-mail로 송부
*참가신청서: 첨부 파일
8. 접수 및 문의 : MCIK 행정 지원부
Tel: 02-3143-2740 / 1979, Fax: 02-3143-2753, E-mail: admin@mcik.co.kr
담당: 황 병진 부장
9. 강연및 강사
Speaker:
Dr. Klaus Oldörp
Senior Application Specialist , Thermo Electron (Kalrsruhe) GmbH, Germany
PhD 1994 on polymer rheology, University of Hamburg, Germany
1993 – 1997 Project leader Synthetic resins, Fraunhofer Research Institute for Wood Research, Braunschweig, Germany
1998 – 2001 Occupatinal Health and Safety Expert, ICI Polyurethanes (later Huntsman Polyurethanes), Everberg, Belgium
2002 – 2003 Independent Consultant, Belgium
2003 - Senior Application Specialist, Thermo Fisher Scientific, Karlsruhe
Speaker: 김승록 박사 (MCIK 대표)
Dr Kim has obtained his Ph.D. in Applied Chemistry from the Centre for Applied Colloid & BioColloid Science (Swinburne University of Technology) in Melbourne in 1994. Following his Ph.D candidature, he accepted a position as a post-doctoral fellow for 2 1/2 years in the area of rheology and polymers. He continued his research work as a senior research fellow for both the Rheology and Material Processing Centre and the Polymer Technology Centre at the Royal Melbourne Institute of Technology (R.M.I.T). He then worked as a research fellow at Kwangwoon University in Seoul and has also worked as a lecturer at the Yeonsei and Samyook Universities in Korea. Dr. Seungrok Kim then worked as a Thermo Haake regional manager in Asia-Pacific till the beginning of 2002.
Dr. Kim established MCIK in early March of 2002. This has been sought after his determination in applying his profound Material Characterization (MC) knowledge into real cases
with regard to a wide range of rheology- and material characterization-related scientific and technological problems.
Thermo Electron 사의 Haake RheoWin Programme 및 Demo specimens 과 다양한 비디오 교재등을 이용하여 유변학적인 방법을 이용한 현탁액내 입자의
분산성 향상 및 최적 시료 Formulation 파악 및 최적 작업 조건 도출 및 효율성있는 QC 방법 (Rheological Fingerprinting) 개발등 산업체의 다양한
Applications 과 관련되어 시도되는 유변학 기초 강연 및 관련 이론의 응용을 위한 Workshop.
Rheology 기초 이론의 소개 및 다양한 재료를 사용하여 실제 시험에의 응용 과정등을 소개하고 도출된 시험 결과의 해석 및 응용 사례등을 소개하게 됩니다.
유변학 시험 결과의 정확한 해석을 위해 시도되는 Particle morphology, 접촉각, 표면장력 및 제타 포텐셜등 보족적인 다양한 종류의
시험 방법에 대한 소개 및 재료의 Easy transfer, 인쇄된 Profile 의 목표로하는 종횡비 유지 관련 시험, 원하는 Geometry 의 Profile
압출 가공 등 응용 방법 관련 질의을 받아 가면서 진행하여 다양한 Rheology 이론의 소개와 함께 이들 이론의
실제 시험에의 응용을 위한 유익한 Forum 이 될것입니다.
* 2013년 12월 05일 (목) 9:30AM ~ 4:30PM
(1-1) 09:30 ~ 10:50 강좌 1 (Dr. Klaus Oldörp)
- Part-1. : Measuring Principle of Rotational Rheological Measuring Systems.
How can we measure viscosity?
Rotational viscometer/ rheometer.
- Part-2: Basics of Steady Shear Rheology Measurements
Viscosity
Time dependence of shear viscosity – Thixotropy & Rheopexy
Viscosity measurement examples
Yield stress
10:50 ~ 11:05 Coffee Break
(1-2) 11:05 ~ 12:35 강좌 2 & Workshop (Dr. SR Kim)
- Part 3. Steady Shear Measurement Workshop:
Comparison of rheometer data against spindle viscometer test data
Vane test methods
Viscosity and volume fraction
Viscosity and shear rate in the presence of surfactant
Data evaluation and analysis elements
Flow curves and constitutive equation fitting
Regression parameters
Thixotropy tests – Thixotropic hysteresis measurements & Thixotropic Index (TI)
Time & temp. dependent measurements
Yield stress measurements
Axial measurements ( tack measurements )
12:35 ~14:00 Lunch
(1-3) 14:00~15:30 강좌 3 (Dr. Klaus Oldörp)
- Part 4 . Correlation of Rheological Curves, Microscopic Images and Optical Measuring Methods
Rheology & Microscopy
Characterization of melting behaviour of polymers
Mixing behaviour of polymer and masterbatch
Characterization of crystallization process
- Part 5. Analyzing and Quantifying Extensional Flow Properties with CaBER
Elongational testing and example data (printing and fiber spinning application etc.)
- Part 6. Viscoelasticity
Linear viscoelasticity
Creep & recovery
Dynamic oscillatory measurements (DOM)
Test and data evaluation using Lissajous plots
Time temperature superposition (TTS)
Molecular structural analysis via DOM
Time and temp. dependent oscillation measurements
Dynamic mechanical thermal analysis ( solid specimen torsional DMA testing)
Dynamic Oscillatory Measurements (DOM)
- Part 7 . Simultaneous UV and thermal assisted rheological testing (UV assisted thermal curing)
Spectroscopical insight into rheology with an on-line FT-IR module Rheonaut
(Coupling of a rheometer with FT-IR spectrometer)
Characterization of curing of polyurethane foams and adhesives in oscillatory shear with a Rheonaut etc.