2019년도 하반기 MCIK 응용 유변학 정기 세미나 - 전자재료 세라믹 고분자 제약 화장품 생물의학 식품 부분 응용 유변학 특별 세미나 ~ McARIS

관리자

Re:   유변학 기초 및 응용 유변학 관련 세미나 공지 

( MCIK  Annual Seminar  in 2019: 

Practical  Approach on Industrial Rheology and 

Rheometry with Special Focus on  Materials 

used in Electronic, Ceramic, Polymer, Cosmetics,

Pharmaceutical, Biomedical and  Food  Industries)

전자재료, 세라믹, 고분자, 화장품, 제약, 생물의학 및 식품 Applications

관련 2019 년도 2차 Annual Applied Rheology Seminar 

를 아래와 같이 개최하오니 관심 있으신 분들의 많은 성원과

참여 부탁 드립니다.

1. 행 사 명 :   2019년  제2차 응용 유변학 정기 세미나 

(전자재료, 세라믹, 고분자, 화장품, 제약, 생물의학 및 식품  분야 특집) 

2. 주 최:  MCIK Center for Applied Rheology & Interface Science ( McARIS)  

&  독일 Thermo Electron (Karlsruhe) GmbH

3. 일 시 :    2019년 11월 01일 (금)  9:00AM ~ 05:00PM

4.  장소:  서울  서초구 외교센터 빌딩 2층 203호 

(지하철 3호선 양재역에 하차 12번 출구 ( 구 8번출구)  예술의 전당 방면 도보 5분)  

- 외교센터 ( http://diplomatic.dic.co.kr/  ) 유료 주차장 1일 20,000 원 ( 사전 신고시에 한함)

연락처

주소 : 서울특별시 서초구 남부순환로 2558(서초동) 외교센터빌딩 205호 대림산업(주) 외교센터사업소

5. 참 가 비 :  무료  (점심 식사는 제공되지 않습니다)

6. 접수 마감일:  2019년 10월  25일  금요일 5:00 PM  

(한정된 좌석 사정으로 등록 순서대로 참가증을 교부 합니다) 

7. 참가신청방법 :  첨부 참가신청서를  엠씨아이케이 주식회사 에  E-mail ( infor@mcik.co.kr ),   

                     또는  Fax  송부

                         *참가신청서: 첨부 파일 

8. 접수 및 문의 :  엠씨아이케이 주식회사  사업 지원부 

Tel: 02-3143-2740 / 1979, Fax: 02-3143-2753, E-mail:  infor@mcik.co.kr
     담당:   유 원민 사원

9. 강연및 강사

 

Speaker:  

Dr. Klaus Oldörp

Senior Application Specialist , Thermo Electron (Kalrsruhe) GmbH, Germany

 

PhD 1994 on polymer rheology, University of Hamburg, Germany

1993 - 1997 Project leader Synthetic resins, Fraunhofer Research Institute for Wood Research, Braunschweig, Germany

1998 - 2001 Occupatinal Health and Safety Expert, ICI Polyurethanes (later Huntsman Polyurethanes), Everberg, Belgium

2002 - 2003 Independent Consultant, Belgium

2003 -         Senior Application Specialist, Thermo Fisher Scientific, Karlsruhe

Speaker:    김승록 박사 ( 엠씨아이케이 주식회사 대표 이사)

 

Dr Kim has obtained his Ph.D. in Applied Chemistry from the Centre for Applied Colloid & BioColloid Science (Swinburne University of Technology) in Melbourne in 1994. Following his Ph.D candidature, he accepted a position as a post-doctoral fellow for 2 1/2 years in the area of rheology and polymers. He continued his research work as a postdoctoral research fellow for both the Rheology and Material Processing Centre and the Polymer Technology Centre at the Royal Melbourne Institute of Technology (R.M.I.T). He then worked as a senior research fellow at Kwangwoon University in Seoul and has also worked as a lecturer at the Yeonsei and Samyook Universities in Korea.  Dr. Seungrok Kim then worked as a Thermo Haake regional manager in Asia-Pacific till the beginning of 2002.   Dr. Kim established MCIK in early March of 2002. This has been sought after his determination in applying his profound MC knowledge into real cases with regard to a wide range of rheology- and material characterization-related scientific and technological problems.

독일 Thermo Electron ( Karlsruhe) GmbH 사 의 Haake RheoWin  Programme 및  관련 산업체 시료를 이용해서 

진행된 시험 결과 및  비디오 교재 등 을 사용하여   전자 산업 공정 에 사용되는 재료 Powder, 현탁액,

Pastes 및 Composite 내  입자의 분산성 및 분포성 향상 및  최적 시료 Formulation  도출을 위한

유변학적 접근 방법 과  유변학적 최적 공정 작업 조건 도출 및  효율성 있는 QC 방법 개발 등

산업체의  다양한 Applications 와  관련되어  시도되는  응용 유변학 기초 강연 및 관련 이론의 산업체 적용을 위한 Forum.    

 

Rheology  기초 이론의 소개 및 관련 산업체의  다양한 재료를  사용한  실제 시험에의 응용 과정등을  

소개하고 도출된 유변학 시험 결과의 과학적인 해석을 위해  사용되는  Low Field NMR Relaxometry,

Multiple Light Scattering, Real Time Qualification of Particulates Under Shear Regime 등

보족 진단 도구 응용 사례 등 을 소개 드리게  됩니다.

 

유변학 시험 결과의 정확한 해석을 위해 시도되는 Particle morphology, 결정화 분석

및 제타 포텐셜 등 보족적인 다양한 종류의 연관 주제 및 관련 시험 방법에 대한

소개 및  목표로 하는 분산성 및 분포성이 뛰어난 재료의 진단 방법 등 응용 방법

관련 질의를 받아 가면서 진행하여 Applied Rheology 이론 및  실제 시험에서의

응용을 위한  유익한 Forum  이 될것입니다. 



* 2019년 11월 01일 (금)  9:00AM ~ 5:00PM
09:00 ~ 09:20    등록 (Registration)
 
(1)   09:20 ~ 10:50 강좌 1   (Dr. Klaus Oldörp)
 
-      Part-1. : Basics of Rotational Rheological Measurements - I : 
                    Steady Shear Rotational Rheological Measurements
                     Rotational rheometers  & Steady shear measurements
 
-      Part-2:    Basics of Rotational Rheological Measurements - 2 : 
                    Optical rheology and elongational rheology  
                     Optical rheology measurements &  CaBER measurements for extensional rheology 
          
 
10:50 ~ 11:05 Morning Coffee Break 
 
 
(2) 11:05 ~ 12:20  강좌 2   (Dr. SR Kim)
 
-      Part-3.  Applications of Steady Shear Rheology
산업체 재료의  공정 가공 유동성 및  내부 미세  구조 특성 규명에 사용되는 
              Steady Shear Rotational Rheological Measurements 
               ~Comparison of rheometer data against spindle viscometer test data,  
                 ~Flow curves and constitutive equation fitting / Making use of rheological models
                ~ Importance of colloid & surface chemistry for steady shear rheology
 
 
-      Part 4.  유변 특성 및 이와 관련된 시료 내부 미세구조 특성 연구를 위한 
         Steady Shear Rotational Rheological Measurements 에 보족적으로 사용 가능한 시험 방법
               ~ Low Field NMR Relaxometry
                ~ Transmission & backscattering optical measurement
                ~  Surface chemical measurements 
 
12:20 ~13:30 Lunch
 
 
(3) 13:30~14:50   강좌 3  (Dr. Klaus Oldörp)
-     Part 5. Basics of Rotational Rheological Measurements - I I:  Viscoelasticity 
      Dynamic Oscillatory Measurements (DOM)
              Linear viscoelasticity
      Molecular structural analysis via DOM
      Dynamic mechanical thermal analysis ( solid specimen torsional DMA testing) 
      Creep & recovery
     Test and data evaluation using Lissajous plots
     Simultaneous UV and Thermal Assisted Rheological Testing
      Polymer molecular structural analysis via DOM 
     Spectroscopical  insight into rheology with an on-line FT-IR & Raman spectroscopy
 
 
14:50 ~  15:05  Afternoon Coffee Break
 
 
(4) 15:05~16:30   강좌 4   (Dr. SR Kim)
 
- Part 6.  Rheology Application Tips (Viscoelasticity) 
  Diagnosis of molecular structure (MW & MWD)  by suing a dynamic oscillatory rheological  analysis 
    Useful topics having industrial significance ( dispersion, distribution and  levelling etc.) 
  
16:30 ~  17:00   Q&A  /   Concluding Remarks